RouterStats Forums

Looking through the manual for the Netgear DG632, it would appear that the Noise Margin figures aren't available via the http (webpage) interface.  However, Googling seems to show that it's based on the AR7 chipset (the same as the DG834 v1,2 and 3). The only difference appears to be the http command used to enable telnet is different: /cgi-bin/webcm?todo=debug  instead of /setup.cgi?todo=debug

I've made an addition to RouterStats which enables the telnet enabling command to be changed, which might make the telnet side workable with the DG632.  Anyone with a DG632 may like to download it here: http://home.vwlowen.co.uk:8765/temp/routerstats47h.zip
In theory, it should work simply by selecting the DG834 v1,2 & 3 (AR7) option on the Telnet Tab and selecting the appropriate "todo=debug" command on the Experimental Tab.

I'd obviously appreciate any feedback.


Thanks,

John.

Just thought I'd let you know that I hooked up a Netgear DG632 after BT said that my Speedtouch router was the cause of 20+ disconnects per day.  I've managed to get Routerstats to telnet into the DG632 using the Login normally tickbox and it's happily logging and graphing Noise and Sync values.  Not so happily it's already recorded a disconnect which doesn't really surprise me. 

Thanks for letting us know.  Sorry your connection isn't up to scratch - hope you get it sorted.

John.